김편의 프리뷰 - T+A 플래그십 인티앰프 PA 3100 HV

2020.03.24. 10:15:58

1,287

Specifications
Pre-amplifier stage
Frequency response + 0 / – 3 dB	0,5 Hz –300 kHz
Signal / noise ratio	105 / 110 dB
Total harmonic distortion	< 0,001%
Intermodulation	< 0,001 %
Channel separation	> 90 dB
Nominal input sensitivity High level (RCA)	7 x 250 mVeff ... 6 Veff / 20 kOhms
Nominal input sensitivity Balanced (XLR)	4 x 500 mVeff ... 12 Veff / 5 kOhms
Outputs
Headphones	50 Ohms
1 x Recorder	250 mVeff / 100 Ohms
PRE out RCA	nom 1 Veff, max 9,5 Veff / 50 Ohms
PRE out XLR	nom 1,45 Veff, max 19,6 Veff / 50 Ohms
Output stage
RMS output per channel into 8 Ohms	300 Watts
RMS output per channel into 4 Ohms	500 Watts
Peak output into 8 Ohms	380 Watts
Peak output into 4 Ohms	700 Watts
Power bandwith	1 Hz – 150 kHz
Frequency response + 0 / – 3 dB	0,5 Hz – 180 kHz
Slew rate	60 V/µs
Damping factor	> 65
Signal / noise ratio	> 115 dB
Total harmonic distortion	< 0,03 %
Reservoir capacity	120000 µF
Mains / Accessories / Dimensions
Mains	110 V/60 Hz or 220/240 V/50 Hz
Standby	< 0,5 W
Remote control	F 3001
Features	Trigger input +5 ... 20V for external switching-on Input 4 can be configured in surround mode (Surround pass-through) connectivity for additional PS 3000 HV LAN connector for home-automation systems
Optional Accessories	PS 3000 HV Power Supply \| PH HV MM oder MC phono module \| APM signal processor module \| Power Three HD (Carbon) \| Power Bar \| Audio Quad (Carbon) \| Speaker Hex (Carbon) HV-Individual finish (Individual colours on request)\| IP control
Dimensions (H x W x D)	17 x 46 x 46 cm
Weight	38 kg
Finishes	Case: silver laquer 47 or titanium laquer 64 Heat sink: black 42
	Technical modifications reserved