I built a Micro ATX gaming PC using the JONSBO D33 and DeepCool cooling components.
The motherboard and graphics card are both from Gigabyte's Gaming lineup, pairing perfectly with the case's clean black design.
The top panel is not removable, so fans or a radiator must be installed using the removable mounting bracket.
If you're installing a radiator, I recommend installing it before mounting the rear fan. If you're using a large air cooler, it's also easier to install the top fans before mounting the cooler.
Since the room temperature was a little high, I used Curve Optimizer to undervolt the CPU.
The case has good airflow, allowing the fans to run at low speeds while maintaining excellent cooling performance.
Chapters
00:00 Intro
00:37 Motherboard Assembly
01:20 Case Overview
02:19 Case Assembly
06:31 Cinematic Showcase
07:20 Fan Configuration and Thermals
PC Parts
CPU Cooler: DeepCool LE360 V2 Zero Dark
Case Fans: DeepCool FD12 V2 3 IN 1
PSU: Maxelite Stars Cygnus 850W ATX 3.1
Additional Tool
As an Amazon Associate, I earn from qualifying purchases.
Sponsored by Jonsbo
Subscribe for more clean & cinematic PC builds
#jonsbo #9800x3d #pcbuild
제공: PC SNAP
9
