Specifications |
|
---|---|
Pre-amplifier stage |
|
Frequency response + 0 / – 3 dB |
0,5 Hz –300 kHz |
Signal / noise ratio |
105 / 110 dB |
Total harmonic distortion |
< 0,001% |
Intermodulation |
< 0,001 % |
Channel separation |
> 90 dB |
Nominal input sensitivity High level (RCA) |
7 x 250 mVeff ... 6 Veff / 20 kOhms |
Nominal input sensitivity Balanced (XLR) |
4 x 500 mVeff ... 12 Veff / 5 kOhms |
Outputs |
|
Headphones |
50 Ohms |
1 x Recorder |
250 mVeff / 100 Ohms |
PRE out RCA |
nom 1 Veff, max 9,5 Veff / 50 Ohms |
PRE out XLR |
nom 1,45 Veff, max 19,6 Veff / 50 Ohms |
Output stage |
|
RMS output per channel into 8 Ohms |
300 Watts |
RMS output per channel into 4 Ohms |
500 Watts |
Peak output into 8 Ohms |
380 Watts |
Peak output into 4 Ohms |
700 Watts |
Power bandwith |
1 Hz – 150 kHz |
Frequency response + 0 / – 3 dB |
0,5 Hz – 180 kHz |
Slew rate |
60 V/µs |
Damping factor |
> 65 |
Signal / noise ratio |
> 115 dB |
Total harmonic distortion |
< 0,03 % |
Reservoir capacity |
120000 µF |
Mains / Accessories / Dimensions |
|
Mains |
110 V/60 Hz or 220/240 V/50 Hz |
Standby |
< 0,5 W |
Remote control |
F 3001 |
Features |
Trigger input +5 ... 20V for external switching-on Input 4 can be configured in surround mode (Surround pass-through) connectivity for additional PS 3000 HV LAN connector for home-automation systems |
Optional Accessories |
PS 3000 HV Power Supply | PH HV MM oder MC phono module | APM signal processor module | Power Three HD (Carbon) | Power Bar | Audio Quad (Carbon) | Speaker Hex (Carbon) HV-Individual finish (Individual colours on request)| IP control |
Dimensions (H x W x D) |
17 x 46 x 46 cm |
Weight |
38 kg |
Finishes |
Case: silver laquer 47 or titanium laquer 64 Heat sink: black 42 |
|
Technical modifications reserved |
T+A PA 3100 HV |
|
---|---|
수입사 |
소리샵 |
수입사 홈페이지 |
|
구매문의 |
02-582-9847 |
<저작권자 ⓒ 하이파이클럽(http://www.hificlub.co.kr) 무단전재 및 재배포금지>